HAND-CUT CRYSTAL RECTANGULAR CHANDELIER | CLHUYL0250-R

Its engineered rectangular profile makes it a high-performing choice for dining tables, kitchen islands, and long living room layouts, where elongated chandeliers produce better coverage and architectural balance. The crystal’s high clarity and faceted texture create a rich glow associated with luxury interiors: Modern, Art Deco, Contemporary, Hollywood Regency, Minimalism, and Transitional.

Built for the long table.

A rectangular composition of hand-cut K9 crystal rods hung from a solid brass frame. The linear form mirrors the geometry of a long dining table or kitchen island below, so the light distributes evenly across the length rather than concentrating in the middle. Hundreds of individual crystal rods refract the bulbs above into a constellation of smaller points across the full span of the fixture.

Where it actually belongs:

[SMALL — 31.5"]

• Above a 6-foot dining table or a smaller kitchen island (4–6 ft).
• Over a breakfast bar or banquette where a round chandelier would look wrong against the linear geometry.
• In a small formal dining room with 9–10 ft ceilings.

[MEDIUM — 39.4"]

• Above an 8-foot dining table (seats 8–10).
• Over a standard kitchen island (7–8 ft) — the sweet spot for most US kitchens.
• In a small-to-medium formal dining room with 10–11 ft ceilings.

[LARGE — 47.2"]

• Above a 10-foot dining table (seats 10–12).
• Over a large kitchen island (8–10 ft) in a serious kitchen.
• In a formal dining room with 11–12 ft ceilings where the rectangular form balances a long table better than a round chandelier.

[GRANDE — 59"]

• Above a 12-foot dining table (seats 14–18).
• Over an extra-large kitchen island or double-island configuration.
• In a formal dining room with 12+ ft ceilings — the Grande is the statement piece of the collection.
• Above a long billiard table, where the full-length light coverage eliminates the need for supplementary fixtures.

About the crystal.

Hand-cut K9 crystal rods — a high-clarity optical glass with a refractive index close to true lead crystal, used across premium contemporary chandeliers in Europe and Asia. Each rod is cut by hand, faceted along its length, and hung individually from the brass frame. On a linear chandelier the quantity is substantial: the Grande carries well over a thousand individual rods. This is what separates a real cut-crystal chandelier from a pressed-glass fixture — hundreds to thousands of pieces, each catching light at its own angle, creating a continuous shimmer across the full length.

When lit, the linear form distributes the refraction across the length of the fixture — the effect is more like a horizon of light than a single sparkling point.

About the brass.

The frame is solid brass, not plated. Linear chandeliers carry their crystal load horizontally rather than concentrically, which means the frame rigidity has to be built in — plated brass deforms over years under linear crystal weight. Solid brass holds its geometry.

Unlacquered by default. The finish will patina gently across years of use; the rate depends on the room climate and cleaning frequency.

Customization.

• Frame finish — solid brass (default), silver/stainless steel, matte black, or other finishes on request. Specify at inquiry.
• Drop length — 50cm standard rod, modifiable at commission. Total fixture height adjustable between 48cm and 152cm at installation.

Part of the Decò Collection.

The Decò Linear is the rectangular companion to the Decò Round. Both share the same K9 crystal, the same solid brass frame, and the same design language — the Round for formal dining tables and foyers, the Linear for long dining tables, kitchen islands, and any architectural geometry that asks for a horizontal rather than concentric light.

Designers often pair them within a single project — a Decò Round in the formal dining room, a Decò Linear over the kitchen island, matched in finish.

Specifications

• Material: Hand-cut K9 crystal rods + solid brass frame (not plated)
• Frame finish: Solid brass (default) / silver (stainless steel) / matte black on request
• Bulbs: [SMALL: 5] [MEDIUM: 6] [LARGE: 8] [GRANDE: 10] × E12 candelabra base, max 40W per socket (bulbs not included — LED candelabra recommended)
• Total load: [SMALL: 200W] [MEDIUM: 240W] [LARGE: 320W] [GRANDE: 400W] maximum at incandescent equivalent
• Wiring: Hardwired, UL listed for US 120V, CE certified for 220V EU
• Dimmable: Yes — TRIAC 120V AC compatible (Lutron Caseta, standard US residential dimmers, most home automation)
• Drop: Standard 50cm rod; total height adjustable 48–152cm at installation. Custom rod lengths on commission.
• Ceiling plate: Rectangular brass plate scaled to fixture width
• Mounting: [SMALL: standard junction box with electrician confirmation.] [MEDIUM/LARGE/GRANDE: requires reinforced ceiling blocking — standard residential junction box (50 lb rated) is not sufficient. Licensed electrician with structural access required.]
• Origin: Designed in Italy
• Note: Crystal rods are hand-cut and hung individually; minor variations in length and facet angle are intrinsic to hand-finished crystal and are not defects.